Table of Contents
Advertisement
4.3.2 Cleaning of the controller cabinet
Required equipment
Equipment, etc.
Vacuum cleaner
Cleaning considerations
This section specifies some special considerations when cleaning the controller.
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
•
Always use ESD protection.
•
Always use cleaning equipment as specified above. Any other cleaning
equipment may shorten the life of paint work, rust inhibitors, signs, or labels.
•
Always make sure that all protective covers are fitted to the controller before
cleaning.
•
Never remove any covers or other protective devices when cleaning the
outside of the controller.
•
Never use compressed air or spray with a high pressure cleaner.
•
Never leave the door open when cleaning the exterior.
© Copyright 2020-2021 ABB. All rights reserved.
4.3.2 Cleaning of the controller cabinet
Note
ESD protected
4 Maintenance
165
Advertisement
Table of Contents
Troubleshooting
