ABB Robotics OmniCore C90XT Product Manual page 346

5 Repair
5.3.9 Replacing the LED indicator
Continued
3
4
5
6
Refitting the LED indicator
Refitting the LED indicator
1
2
3
Continues on next page
346
Action
Loose the attachment screws locking the
cable.
Remove the terminals (X1&X2) of the
cable from the lamp.
Turn the MON_LAMP screw anti-clock-
wise to remove the screw.
Take the LED indicator out.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Insert the LED indicator into the cover
from outer side of the door and the screw
from inner side and screw them up.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1900001926
Note/Illustration
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E