ABB Robotics OmniCore C90XT Product Manual page 210

5 Repair
5.2.6 Replacing the connected services gateway
Continued
Disconnecting the antenna
1
2
3
4
Removing the connected services gateway
1
Continues on next page
210
Action
Disconnect the antenna cable from the
connected services gateway by rotating
the connector.
Record the cable routine when you re-
move the cable from the cabinet.
Take the cable out from the cable grom-
met.
Remove the magnet part of the antenna
from the top the cabinet.
Action
Disconnect:
i
• K7.X1 - K2.X3
• K7.X2 - A2.X5
Note
The connector K7.X2 is locked;
grab the connector, push it in to
release it and then remove the
connector.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1900001948
Removing the cable grommet assembly on
page 320.
xx1900001949
Note/Illustration
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E