ABB Robotics OmniCore C90XT Product Manual page 321

Removing the cable grommet assembly
1
2
3
4
Releasing the cables from the cable grommet assembly
1
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Remove the cables out from the clips in
the cabinet carefully.
Note
Make records about the sequence that
cables are removed. The cables need to
be installed in the same position.
Remove the attachment screws on the
cover.
Push the cable grommet assembly into
the cabinet.
Take the cable grommet assembly out.
Action
Unscrew the cable entry frame from the
enclosure wall.
© Copyright 2020-2021 ABB. All rights reserved.
5.3.6 Replacing the cable grommet assembly
Note/Illustration
xx1900002340
Note/Illustration
xx1900002332
Continues on next page
5 Repair
Continued
321