ABB Robotics OmniCore C90XT Product Manual page 193

2
Removing the heat exchanger
1
2
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
Remove the air filter.
Action
Disconnect heat exchanger:
• G3.X1-K2.X17
Remove the screws locking the sensor
and pull out the sensor.
© Copyright 2020-2021 ABB. All rights reserved.
5.2.3.2 Replacing the heat exchanger
Note/Illustration
xx1900001492
Note/Illustration
xx1900001490
Continues on next page
5 Repair
Continued
193