ABB Robotics OmniCore C90XT Product Manual page 241

Refitting the connected services gateway
1
2
3
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 30.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
Hook up the connected services gateway
to the bracket and push carefully into
position.
Note
During the installation, the gap between
the lower surface of the Connected Ser-
vices Gateway and the upper surface of
the main computer should be zero.
© Copyright 2020-2021 ABB. All rights reserved.
5.2.8 Replacing the main computer
Note/Illustration
xx1900001890
xx1800000495
TOP VIEW
Continues on next page
5 Repair
Continued
241