ABB Robotics OmniCore C90XT Product Manual page 274

5 Repair
5.2.12 Replacing the fieldbus master
Continued
2
3
i
Continues on next page
274
Action
Remove the screws holding the main
computer.
Remove the assembly from the mounting
plate.
Note
Avoid colliding with the frame when re-
moving the unit.
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
For connected services gateway wired, there is no power cable.
© Copyright 2020-2021 ABB. All rights reserved.
Note/Illustration
xx1900001877
xx1900001878
xx1900001885
Product manual - OmniCore C90XT
3HAC073706-001 Revision: E