Wheel Sensor Replacement - Honda CR-V 1997 Service Manual

Pulsers/Wheel Sensors
Wheel Sensor Replacement
NOTE:
• Be careful when installing the sensors to avoid twisting the w ires .
• The torque value of the bolts is 9.8 N·m (1.0 kgf·m, 7 IbHt).
Front
6mm BOLT
9.8 Nom 11 .0 kgf·m , 7.2lbf.ftl
WHEEL SENSOR
Rea,
1. Remove the hub bearing unit (see section 18).
2. Remove the four backing plate bolts.
3,
Pull the backing plate away from the trailing arm , then remove the wheel sensor. It is not necessary to disconnect the
brake line.
NOTE: This illustration shows the '97 - 98 models. The '99 - 00 models are similar.
6mmBOLT
9.8 N·m 11.0 kgf·m, 7.2 Ibf.ftl
WHEEL SENSOR
19-58