Starter Performance Test - Honda Accord 2008 Manual

07/11/02 09:04:51 61TA0000_040_0011
Starting System

Starter Performance Test

1. Remove the starter (see page 4-11).
2. Connect a fully charged battery to the starter for
this test using the thickest (gauge) wire possible
(preferably the same gauge as used on the vehicle).
NOTE: To avoid damaging the starter, never leave
the battery connected for more than 10 seconds.
＊０１
3. Connect the battery as shown. If you hear the
starter, it is working properly.
4. Disconnect the battery terminal from the starter
body. If you hear the starter, it is working properly.
＊０２
4-10
5. Clamp the starter firmly in a vise.
6. Connect the starter to the battery as shown, and
confirm that the motor starts and keeps rotating.
S
BODY
(GROUND)
7. If the electric current meets the specification when
the battery voltage is at 11.5 V, the starter is
working properly.
Specification
Electric Current: 80 A or less
BODY
(GROUND)
ＴＡ０８ＡＥ４Ａ４６５０００５６９０１ＦＥＡＴ００
B
S
STARTER
＊０３