Honda Accord 2008 Manual page 104

07/11/02 09:07:38 61TA0000_050_0005
16. Remove the drive belt (see page 4-31).
17. Remove the power steering (P/S) pump (A) without
disconnecting the P/S hoses, then remove the P/S
hose bracket (B).
＊０８
B
18. Remove the radiator cap.
19. Remove the A/C condenser fan shroud assembly
(see page 10-14).
20. M/T model: Remove the three bolts securing the
shift cable holder, then remove the shift cable and
the select cable. Do not bend the cables excessively
(see step 8 on page 13-7).
21. M/T model: Remove the clutch slave cylinder and
the clutch line bracket mounting nut. Do not
operate the clutch pedal once the slave cylinder has
been removed (see step 6 on page 13-6).
22. Raise the vehicle on the lift.
23. Remove the front wheels.
24. Remove the splash shield.
A
25. Loosen the drain plug in the radiator, and drain the
engine coolant (see page 10-6).
26. Drain the engine oil (see page 8-10).
27. Drain the transmission fluid:
• Manual transmission (see page 13-5)
• Automatic transmission (see page 14-242)
28. Remove exhaust pipe A.
＊０９
＊１０
(cont'd)
5-5