Honda Accord 2008 Manual page 115

07/11/02 09:07:46 61TA0000_050_0016
Engine Assembly
Engine Installation (cont'd)
24. Tighten the bolts securing the subframe middle
mounts.
＊１２
25. Tighten the nuts securing the lower transmission
mount.
＊１３
26. Lower the vehicle on the lift.
27. Remove the engine support hanger and the engine
hanger adapter.
5-16
12 x 1.25 mm
44 N·m
(4.5 kgf·m,
33 lbf·ft)
Replace.
10 x 1.25 mm
49 N·m
(5.0 kgf·m,
39 lbf·ft)
Replace.
10 x 1.25 mm
44 N·m (4.5 kgf·m, 33 lbf·ft)
28. Tighten the front engine mount bolt (A), then install
the front engine mount stop (B) and the vacuum
hose (C).
B 12 x 1.25 mm
79 N·m (8.1 kgf·m, 59 lbf·ft)
C
A
10 x 1.25 mm
54 N·m
(5.5 kgf·m, 40 lbf·ft)
Replace.
29. A/T model: Install the ATF cooler pipe brackets (D).
30. M/T model: Install the rear engine mount.
12 x 1.25 mm
78 N·m
(8.0 kgf·m, 58 lbf·ft)
Replace.
12 x 1.25 mm
79 N·m
(8.1 kgf·m, 59 lbf·ft)
Replace.
6 x 1.0 mm
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
D
D
＊１４
＊１５