Honda Accord 2008 Manual page 84

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:05:35 61TA0000_040_0038

Special Tools Required

• Handle driver 07749-0010000

• Attachment, 42 x 47 mm 07746-0010300

NOTE: Refer to the Exploded View as needed during

this procedure.

1. Test the alternator and regulator before you

remove them (see page 4-28).

2. Remove the alternator (see page 4-34).

3. If the front bearing needs replacing, remove the

pulley locknut with a 10 mm wrench (A) and a

22 mm wrench (B). If necessary, use an impact

4. Remove the harness stay and the three flange nuts

from the alternator.

5. Remove the end cover.

6. Remove the brush holder.

Chapters

Table of Contents