ABB IRB 460 Series Product Manual page 86

2 Installation and commissioning
2.4.1 Option 87-1 - Installing the cooling fan for axis-1 motor
Continued
Equipment
Locking liquid
Standard toolkit
Circuit diagram
Other tools and procedures
may be required. See refer-
ences to these procedures
in the step-by-step instruc-
tions below.
Installing the cooling fan
1
2
3
Continues on next page
86
Art. no.
-
-
-
Action
DANGER
Turn off all:
• electric power supply to the robot
• hydraulic pressure supply to the robot
• air pressure supply to the robot
Before entering the robot working area.
Disassemble the parts of the fan box by remov-
ing the attachment screws.
Loosen the three tightening screws, to avoid
damaging the surfaces of the motor when fit-
ting the fan box.
© Copyright 2012-2018 ABB. All rights reserved.
Note
Loctite 243. Used for the three tightening
screws.
Content is defined in section
tools on page 383.
See chapter Circuit diagrams on page
These procedures include references to
the tools required.
Note
xx1300000843
xx1300000844
Product manual - IRB 460
3HAC039842-001 Revision: P
Standard
391.