Repair; Introduction - ABB IRB 460 Series Product Manual

4 Repair

4.1 Introduction

Structure of this chapter
This chapter describes all repair activities recommended for the IRB 460 and any
external unit.
It is made up of separate procedures, each describing a specific repair activity.
Each procedure contains all the information required to perform the activity, for
example spare parts numbers, required special tools, and materials.
Required equipment
The details of the equipment required to perform a specific repair activity are listed
in the respective procedures.
The details of equipment are also available in different lists in the chapter
information on page
Safety information
There are general safety information and specific safety information. The specific
safety information describes the danger and safety risks while performing specific
steps in a procedure. Make sure to read through the chapter
before commencing any service work.
Product manual - IRB 460
3HAC039842-001 Revision: P
WARNING
Repair activities not described in this chapter must only be carried out by ABB.
Otherwise damage to the mechanics and electronics may occur.
375.
Note
If the IRB 460 is connected to power, always make sure that the IRB 460 is
connected to earth before starting any repair work.
For more information see:
• Product manual - IRC5
© Copyright 2012-2018 ABB. All rights reserved.
4 Repair
4.1 Introduction
Reference
Safety on page 17
139