ABB IRB 460 Series Product Manual page 193

Equipment, etc.
VK cover
Sealing ring
Taper roller bearing
Press tool, premounting outer
race bearing
Press tool, replacing shaft
Auxiliary shaft
KM7 socket
Grease
Rust preventive
Locking liquid
Standard toolkit
Other tools and procedures
may be required. See refer-
ences to these procedures in
the step-by-step instructions
below.
Press tool pre-mounting outer race bearings
The press tool used for pre-mounting the outer bearing races in the tilthouse,
consists of the parts shown in the figure. For art. no. see
page
xx1100000250
Product manual - IRB 460
3HAC039842-001 Revision: P
192.
A B C
A Thread washer (2 pcs)
B Support washer (3HAC040029-001)
C Upper arm
D Outer race bearing
© Copyright 2012-2018 ABB. All rights reserved.
4.4.2 Replacing the tilthouse unit
Art.no.
Spare parts on page 389
3HAB3701-19
3HAA2103-13
3HAC040028-001
3HAC040029-001
3HAC040035-001
3HAC040025-001
3HAB3537-1
3HAB7116-1
-
D E F G
4 Repair
Continued
Note
VK 65x8 (2 pcs)
D=70/85 T=8 (2 pcs)
Used for mounting outer
bearing races.
Used for assembly and disas-
sembly.
Used for disassembly of
shaft.
Dinitrol 490
Loctite 243
Content is defined in section
Standard tools on page 383.
These procedures include
references to the tools re-
quired.
Required equipment on
H A
Continues on next page
193