ABB IRB 460 Series Product Manual page 251

4
5
6
7
Product manual - IRB 460
3HAC039842-001 Revision: P
Action
Valid for design with support ring.
Fit the support ring with the included o-ring
on the shaft. Use a plastic mallet, if neces-
sary.
Note
Align the chamfer side of the support ring
with the shaft shoulder as shown in figure.
Valid for design with POM sealing.
Place the POM sealing on the shaft.
Secure the link with a roundsling in an over-
head crane and lift it to the mounting position.
Fit the auxiliary shaft on the shaft.
© Copyright 2012-2018 ABB. All rights reserved.
4.4.6 Replacing the linkage - link
Note
xx1300000004
xx1100000200
Art.no. is specified in Required equipment
on page 242
Continues on next page
4 Repair
Continued
251