5 Calibration
5.3 Updating revolution counters
Continued
Step 2 - Updating the revolution counter with the FlexPendant
Use this procedure to update the revolution counter with the FlexPendant (IRC5).
1
2
Continues on next page
354
Action
On the ABB menu, tap Calibration.
xx1500000942
All mechanical units connected to the system are shown with their calibration status.
Tap the mechanical unit in question.
xx1500000943
© Copyright 2012-2018 ABB. All rights reserved.
Product manual - IRB 460
3HAC039842-001 Revision: P