ABB IRB 460 Series Product Manual page 252

4 Repair
4.4.6 Replacing the linkage - link
Continued
8
9
10
Continues on next page
252
Action
Place the inner race of the inner bearing on
the shaft and press it in position using the
press tool link.
Place the inner race of the outer bearing and
link, in the following order on the shaft:
• link
• bearing
Press the parts together with the press tool,
link.
© Copyright 2012-2018 ABB. All rights reserved.
Note
Art, no, is specified in Required equip-
ment on page 242.
xx1100000201
Auxiliary shaft not shown in this figure.
xx1100000202
Parts:
A: Inner race of outer bearing
B: Link
C: Inner bearing complete
Art.no. is specified in Required equipment
on page 242.
Product manual - IRB 460
3HAC039842-001 Revision: P