Spanning-Tree Priority (Bridge Priority) - Allied Telesis AR2050V Command Reference Manual

S T C
PANNING REE OMMANDS
- (
SPANNING TREE PRIORITY BRIDGE PRIORITY

spanning-tree priority (bridge priority)

Overview Use this command to set the bridge priority for the device. A lower priority value
indicates a greater likelihood of the device becoming the root bridge.
Use this command for RSTP, STP or MSTP. When MSTP mode is configured, this will
apply to the CIST.
Use the no variant of this command to reset it to the default.
spanning-tree priority <priority>
Syntax
no spanning-tree priority
Default The default priority is 32678.
Mode Global Configuration
Usage To force a particular device to become the root bridge use a lower value than other
devices in the spanning tree.
awplus#
Example
awplus(config)#
Related spanning-tree mst instance priority
Commands
show spanning-tree
C613-50186-01 Rev B
)
Parameter Description
<priority>
<0-61440> The bridge priority, which will be rounded to a multiple of
4096.
configure terminal
spanning-tree priority 4096
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
543