Show Static-Channel-Group - Allied Telesis AR2050V Command Reference Manual

L A C
INK GGREGATION OMMANDS
- -
SHOW STATIC CHANNEL GROUP

show static-channel-group

Overview Use this command to display all configured static channel groups and their
corresponding member ports. Note that a static channel group is the same as a
static aggregator.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
available on our website at alliedtelesis.com.
show static-channel-group
Syntax
Mode User Exec and Privileged Exec
awplus#
Example
Output Example output from show static-channel-group
Related static-channel-group
Commands
C613-50186-01 Rev B
show static-channel-group
awplus#show static-channel-group
LAG Maximum
LAG Static Maximum: 2
LAG Dynamic Maximum: 2
LAG Static Count
LAG Dynamic Count
LAG Total Count
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
: 2
: 0
: 1
: 1
"Getting Started
Guide, which is
568