Ppp Commands; Introduction - Allied Telesis AR2050V Command Reference Manual

19

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
and validate the PPP (Point-To-Point) protocol. For more information about PPP,
see the
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50186-01 Rev B

PPP Commands

Point-to-Point Protocol (PPP) Feature Overview and_Configuration
"debug ppp" on page 577
"encapsulation ppp" on page 580
"interface (PPP)" on page 582
"ip address negotiated" on page 583
"ip tcp adjust-mss" on page 585
"ip unnumbered" on page 587
"ipv6 tcp adjust-mss" on page 589
"keepalive (PPP)" on page 591
"mtu (PPP)" on page 593
"peer default ip address" on page 594
"peer neighbor-route" on page 596
"ppp authentication" on page 598
"ppp authentication refuse" on page 600
"ppp hostname" on page 602
"ppp ipcp dns" on page 604
"ppp ipcp dns suffix-list" on page 606
"ppp ipcp ip-override" on page 608
"ppp password" on page 609
"ppp service-name (PPPoE)" on page 610
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Guide.
575