Lacp Port-Priority - Allied Telesis AR2050V Command Reference Manual

L A C
INK GGREGATION OMMANDS
-
LACP PORT PRIORITY

lacp port-priority

Overview Use this command to set the priority of a device port. Ports are selected for
aggregation based on their priority, with the higher priority (numerically lower)
ports selected first.
Use the no variant of this command to reset the priority of port to the default.
Syntax lacp port-priority <1-65535>
no lacp port-priority
Default The default is 32768.
Mode Interface Configuration
awplus#
Example
awplus(config)#
awplus(config-if)#
C613-50186-01 Rev B
Parameter Description
<1-65535>
Specify the LACP port priority.
configure terminal
interface port1.0.5
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
lacp port-priority 34
556