Show Diagnostic Channel-Group - Allied Telesis AR2050V Command Reference Manual

L A C
INK GGREGATION OMMANDS
-
SHOW DIAGNOSTIC CHANNEL GROUP

show diagnostic channel-group

Overview This command displays dynamic and static channel group interface status
information. The output of this command is useful for Allied Telesis authorized
service personnel for diagnostic purposes.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show diagnostic channel-group
Syntax
Mode User Exec and Privileged Exec
awplus#
Example
Output Figure 17-2: Example output from the show diagnostic channel-group
Related show tech-support
Commands
C613-50186-01 Rev B
show diagnostic channel-group
command

awplus# show diagnostic channel-group

Channel Group Info based on NSM:
Note: Pos - position in hardware table
-------------------------------------------------------------
Dev Interface IfIndex
-------------------------------------------------------------
po1 4601
po1 4601

Channel Group Info based on HSL:
Note: Pos - position in hardware table
-------------------------------------------------------------
Dev Interface IfIndex
-------------------------------------------------------------
po1 4601

Channel Group Info based on IPIFWD:
Note: Pos - position in hardware table
-------------------------------------------------------------
Dev Interface IfIndex
-------------------------------------------------------------
po1 4601


No error found
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Member port IfIndex
port1.0.4 5004
port1.0.5 5005
Member port IfIndex
Member port IfIndex
"Getting Started
Guide.
Active Pos
No
No
Active Pos
N/a
Active Pos
N/a
561