L
A
C
INK
GGREGATION
OMMANDS
SHOW PORT ETHERCHANNEL
show port etherchannel
Overview
Use this command to show LACP details of the device port specified.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
available on our website at alliedtelesis.com.
Syntax
show port etherchannel <port>
Mode
User Exec and Privileged Exec
awplus#
Example
Output
Example output from show port etherchannel
awplus#show port etherchannel port1.0.2
LACP link info: port1.0.2 - 7007
Link: port1.0.2 (IfIndex: 7007)
Aggregator: po10 (IfIndex: 4610)
Receive machine state: Current
Periodic Transmission machine state: Slow periodic
Mux machine state: Collecting/Distributing
Actor Information:
Selected ................. Selected
Physical Admin Key .............. 2
Port Key ....................... 10
Port Priority ............... 32768
Port Number .................. 7007
Mode ....................... Active
Timeout ...................... Long
Individual .................... Yes
Synchronised .................. Yes
Collecting .................... Yes
Distributing .................. Yes
Defaulted ...................... No
Expired ........................ No
C613-50186-01 Rev B
Parameter
Description
<port>
Name of the device port to display LACP information about.
show port etherchannel port1.0.2
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Partner Information:
Partner Sys Priority ....... 0x8000
Partner System .. ec-cd-6d-d1-64-d0
Port Key ....................... 10
Port Priority ............... 32768
Port Number .................. 5001
Mode ....................... Active
Timeout ...................... Long
Individual .................... Yes
Synchronised .................. Yes
Collecting .................... Yes
Distributing .................. Yes
Defaulted ...................... No
Expired ........................ No
"Getting Started
Guide, which is
567