Usb Write Count For Endpoint 0 Register - Samsung S3C2500B User Manual

S3C2500B

10.5.12 USB WRITE COUNT FOR ENDPOINT 0 REGISTER

When OORDY is set for OUT endpoints, USBWCEP0[22:16] maintains the byte-count number of data in FIFO
due to be unloaded by the MCU. In case of IN mode, MCU first writes the byte-count number of data to be loaded
into FIFO, then write data into FIFO.
Register Address
USBWCEP0 0xF00E0030
Bit Number Bit Name
[6:0] CPU WRiTe
CouNT
(CPUWRTCNT)
[15:7] Reserved
[22:16] WRiTe CouNT
(WRTCNT)
[31:23] Reserved
Table 10-25. USBWCEP0 Register
R/W
R/W USB Write Count for Endpoint 0 Register
Table 10-26. USBWCEP0 Register Description
MCU USB
R/W R
R W
Description
Description
the byte-count number of data to be loaded into
FIFO
the byte-count number of data in FIFO due to be
unloaded by the MCU
USB CONTROLLER
Reset Value
0x00000000
10-45