S3C2500B
10.5.4 USB INTERRUPT ENABLE REGISTER
Corresponding to each USB Interrupt Register (USBINTR), there is an interrupt enable bit at USB Interrupt
Enable Register (USBINTRE). By default all interrupts are disbled.
Register
Address
USBINTRE
0xF00E000C
Bit Number
Bit Name
[4:0]
EP0 Interrupt
ENable - EP4
Interrupt ENable
(EP0IEN - EP4IEN)
[7:5]
Reserved
[8]
SUSpend Interrupt
ENable (SUSIEN)
[9]
Reserved
[10]
ReSeT Interrupt
ENable (RSTIEN)
[11]
DISConnect
Interrupt ENable
(DISCIEN)
[31:12]
Reserved
Table 10-8. USBINTRE Register
R/W
R/W
USB interrupt enable register
Table 10-9. USBINTRE Register Description
MCU
USB
R/W
R
R/W
R
R/W
R
R/W
R
Description
Description
If bit = 0, the corresponding interrupt is disabled.
If bit = 1, the corresponding interrupt is enabled.
If bit = 0, the corresponding interrupt is disabled.
If bit = 1, the corresponding interrupt is enabled.
If bit = 0, the corresponding interrupt is disabled.
If bit = 1, the corresponding interrupt is enabled.
If bit = 0, the corresponding interrupt is disabled.
If bit = 1, the corresponding interrupt is enabled.
USB CONTROLLER
Reset Value
0x0000041f
10-17