Auth-Mac Username - Allied Telesis x510-28GTX Command Reference Manual

A C
UTHENTICATION OMMANDS
-
AUTH MAC USERNAME

auth-mac username

Overview Use this command to specify the format of the MAC address in the username and
password field when a request for MAC-based authorization is sent to a RADIUS
server.
auth-mac username {ietf|unformatted} {lower-case|upper-case}
Syntax
Default auth-mac username ietf lower-case
Mode Global Configuration
Usage This command is provided to allow other vendors', AlliedWare, and AlliedWare
Plus switches to share the same format on the RADIUS server.
Example To configure the format of the MAC address in the username and password field to
be changed to IETF and upper-case, use the following commands:
awplus#
awplus(config)#
Related auth-mac username
Commands
show running-config
C613-50170-01 Rev B
Parameter Description
ietf
The MAC address includes a hyphen between each 2 bytes.
(Example: xx-xx-xx-xx-xx-xx)
unformatted
The MAC address does not include hyphens. (Example:
xxxxxxxxxxxx)
lower-case
The MAC address uses lower-case characters (a-f)
upper-case
The MAC address uses upper-case characters (A-F)
configure terminal
auth-mac username ietf upper-case
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1767