Auth-Web-Server Ssl - Allied Telesis x510-28GTX Command Reference Manual

A C
UTHENTICATION OMMANDS
- -
AUTH WEB SERVER SSL

auth-web-server ssl

Overview This command enables HTTPS functionality for the Web-Authentication server
feature.
Use the no variant of this command to disable HTTPS functionality for the
Web-Authentication server.
Syntax auth-web-server ssl
no auth-web-server ssl
Default HTTPS functionality for the Web-Authentication server feature is disabled by
default.
Mode Global Configuration
Examples To enable HTTPS functionality for the Web-Authentication server feature, use the
following commands:
awplus#
awplus(config)#
To disable HTTPS functionality for the Web-Authentication server feature, use the
following commands:
awplus#
awplus(config)#
Validation show auth
Commands
show auth-web-server
show running-config
C613-50170-01 Rev B
configure terminal
auth-web-server ssl
configure terminal
no auth-web-server ssl
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1801