Match Tcp-Flags - Allied Telesis x510-28GTX Command Reference Manual

Q S C
O OMMANDS
-
MATCH TCP FLAGS

match tcp-flags

Overview Sets one or more TCP flags (control bits) for a class-map to match on.
Use the no variant of this command to remove one or more TCP flags for a
class-map to match on.
Syntax match tcp-flags {[ack][fin][psh][rst][syn][urg]}
no match tcp-flags {[ack][fin][psh][rst][syn][urg]}
Mode Class Map Configuration
To set the class-map's TCP flags to ack and syn, use the commands:
Examples
awplus#
awplus(config)#
awplus(config-cmap)#
To remove the TCP flags ack and rst, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
C613-50170-01 Rev B
Parameter Description
ack
Acknowledge.
fin
Finish.
psh
Push
rst
Reset.
syn
Synchronize.
urg
Urgent.
configure terminal
class-map
configure terminal
class-map
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
match tcp-flags ack syn
no match tcp-flags ack rst
1631