Q
S C
O
OMMANDS
SHOW MLS QOS INTERFACE
show mls qos interface
Overview
Displays the current settings for the interface. This includes its default CoS and
queue, scheduling used for each queue, and any policies/maps that are attached.
show mls qos interface [<port>]
Syntax
Mode
User Exec and Privileged Exec
Example
To display current CoS and queue settings for interface port1.0.1, use the
command:
awplus#
Output
Figure 40-4: Example output from the show mls qos interface command
C613-50170-01 Rev B
Parameter
Description
<port>
Switch port.
show mls qos interface port1.0.1
Default CoS:
7
Default Queue: 7
Number of egress queues: 8
Queue Set: 1
Egress Queue:
Status:
Scheduler:
Queue Limit:
Egress Rate Limit: 0 Kb
Egress Queue:
Status:
Scheduler:
Queue Limit:
Egress Rate Limit: 0 Kb
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
0
Enabled
Strict Priority
12%
1
Enabled
Strict Priority
12%
1654