PIM-SM C
OMMANDS
-
SHOW IP PIM SPARSE
MODE LOCAL
show ip pim sparse-mode local-members
Overview
Use this command to show detailed local member information on a VLAN interface
configured for PIM-SM. If you do not specify a VLAN interface then detailed local
member information is shown for all VLAN interfaces configured for PIM-SM.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip pim sparse-mode local-members [<interface>]
Syntax
Mode
User Exec and Privileged Exec
Example
To show detailed PIM-SM information for all PIM-SM configured VLAN interfaces,
use the command:
awplus#
Output
Figure 33-6: Example output from the show ip pim sparse-mode
Example
To show detailed PIM-SMv6 information for the PIM-SM configured interface
vlan1, use the command:
awplus#
Output
Figure 33-7: Example output from the show ip pim sparse-mode
C613-50170-01 Rev B
-
MEMBERS
Parameter
Description
<interface>
Optional. Specify the interface. For instance, VLAN interface vlan2.
show ip pim sparse-mode local-members
local-members command
awplus#show ip pim sparse-mode local-members
PIM Local membership information
vlan1:
(*, 224.0.0.4) : Include
vlan203:
(*, 223.0.0.3) : Include
show ip pim sparse-mode local-members vlan1
local-members vlan1 command
awplus#show ip pim sparse-mode local-members vlan1
PIM Local membership information
vlan1:
(*, 224.0.0.4) : Include
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
1360