Clear Ipv6 Mroute - Allied Telesis x510-28GTX Command Reference Manual

M C
ULTICAST OMMANDS
6
CLEAR IPV MROUTE

clear ipv6 mroute

Overview Use this command to delete one or more dynamically-added route entries from
the IPv6 multicast routing table.
You need to do this, for example, if you want to create a static route instead of an
existing dynamic route.
Syntax clear ipv6 mroute {*|<ipv6-group-address>
[<ipv6-source-address>]}
Mode Privileged Exec
Usage When this command is used, the Multicast Routing Information Base (MRIB) clears
the relevant IPv6 multicast route entries in its IPv6 multicast route table, and
removes the entries from the multicast forwarder. The MRIB sends a "clear"
message to the multicast protocols. Each multicast protocol has its own "clear"
multicast route command.
This command does not remove static routes from the routing table or the
configuration. To remove static routes, use the no parameter of the command
multicast
awplus#
Example
Related ipv6 multicast route
Commands
show ipv6 mroute
C613-50170-01 Rev B
Parameter
*
<ipv6-group-address>
<ipv6-source-address> Source IPv6 address, in hexadecimal notation in the
route.
clear ipv6 mroute 2001::2 ff08::1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Deletes all dynamically-learned IPv6 multicast routes.
Group IPv6 address, in hexadecimal notation in the
format X.X::X.X.
format X.X::X.X.
ipv6
1288