Client Mutual-Authentication - Allied Telesis x510-28GTX Command Reference Manual

L RADIUS S C
OCAL ERVER OMMANDS
-
CLIENT MUTUAL AUTHENTICATION

client mutual-authentication

Overview This command enables or disables mutual certificate authentication for all
RadSecProxy clients. When enabled, the RadSecProxy local-server application will
request and validate an X.509 certificate from the client when establishing a
connection.
The no variant of this command disables mutual certificate validation. The
local-server application will still transmit the local server certificate to the client,
but will not expect or validate a certificate from the client.
client mutual-authentication
Syntax
no client mutual-authentication
Default Mutual authentication is enabled by default.
Mode RadSecProxy Local Server Configuration
Example Disable mutual certificate validation with the following command:
awplus#
awplus(config)#
awplus(config-radsecproxy-srv)#
mutual-authentication
Related client (radsecproxy-srv)
Commands
client name-check
radius-secure-proxy local-server
Command Version 5.4.6-2.1: command added
changes
C613-50170-01 Rev B
configure terminal
radius-secure-proxy local-server
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
no client
1912