Openflow Ssl Trustpoint - Allied Telesis x510-28GTX Command Reference Manual

O F C
PEN LOW OMMANDS

OPENFLOW SSL TRUSTPOINT

openflow ssl trustpoint
Overview Use this command to configure the local trustpoint to be used for authentication.
Use the no variant of this command to disable the local trustpoint.
Syntax openflow ssl trustpoint local
no openflow ssl trustpoint local
Default There is no trustpoint configured by default.
Mode Global Configuration mode.
Usage Use this command to specify a local self-signed certificate authority trustpoint for
authentication. You must first create the trustpoint using the crypto pki
trustpoint command.
Example To configure a local trustpoint, use the commands:
awplus#
awplus(config)#
To delete the local trustpoint, use the command:
awplus(config)#
Related openflow controller
Commands
openflow ssl trustpoint
Command Version 5.4.7-1.1: command added
changes
C613-50170-01 Rev B
configure terminal
openflow ssl trustpoint local
no openflow ssl trustpoint
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2047