Show Ipv6 Pim Sparse-Mode Bsr-Router - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 -
SHOW IPV PIM SPARSE MODE BSR

show ipv6 pim sparse-mode bsr-router

Overview Use this command to show the PIM-SMv6 Bootstrap Router (BSR) IPv6 address.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ipv6 pim sparse-mode bsr-router
Mode User Exec and Privileged Exec
Example To display the BSR IPv6 address, use the command:
awplus#
Output Figure 34-3: Example output from the show ipv6 pim sparse-mode bsr-router
Related show ipv6 pim sparse-mode rp mapping
commands
show ipv6 pim sparse-mode neighbor
C613-50170-01 Rev B
-
ROUTER
show ipv6 pim sparse-mode bsr-router
command
awplus#show ipv6 pim sparse-mode bsr-router 
PIM6v2 Bootstrap information 
BSR address: 2001:203::213 (?) 
00:36:25, BSR Priority: 64, Hash mask length: 126 
Uptime:
00:01:46 
Expires:
Role: Candidate BSR 
State: Candidate BSR 

Candidate RP: 2001:5::211(vlan5) 
Advertisement interval 60 seconds 
Next C-RP advertisement in 00:00:43
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
1414