Atmf Cleanup - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

ATMF CLEANUP

atmf cleanup
Overview This command erases all data from NVS and all data from Flash excluding the
following:
•
•
•
It then reboots to put the device in a clean state ready to be used as a replacement
node on a provisioned port.
atmf cleanup
Syntax
Mode Privileged Exec
Usage This command is an alias to the
Note that this command can only be used on standalone switches, not stacked
switches.
Example To erase data, use the command:
Node_1#
This command will erase all NVS, all flash contents except for
the boot release, and any license files, and then reboot the
switch. Continue? (y/n):y
Related erase factory-default
Commands
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
the current release file
the backup release file
license files
atmf cleanup
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
erase factory-default command.
2252