Storm-Action - Allied Telesis x510-28GTX Command Reference Manual

Q S C
O OMMANDS
-
STORM ACTION

storm-action

Overview Sets the action to be taken when triggered by QoS Storm Protection (QSP). There
are three available options:
•
•
•
The no variant of this command will negate the action set by the storm-action
command.
storm-action {portdisable|vlandisable|linkdown}
Syntax
no storm-action
Mode Policy Map Class Configuration
Examples To apply the storm protection of vlandisable to the policy-map named "pmap2"
and the class-map named "cmap1", use the following commands:
awplus#
awplus(config)#
awplus(config-pmap)#
awplus(config-pmap-c#
To negate the storm protection set on the policy-map named "pmap2" and the
class-map named "cmap1", use the following commands:
awplus#
awplus(config)#
awplus(config-pmap)#
awplus(config-pmap-c#
Related storm-downtime
Commands
storm-protection
storm-rate
storm-window
C613-50170-01 Rev B
portdisable will disable the port in software.
vlandisable will disable the port from the VLAN matched by the class-map
in class-map. This option requires the match vlan class-map to be present in
the class-map
linkdown will physically bring the port down. .
Parameter Description
portdisable
Disable the port in software.
vlandisable
Disable the VLAN.
linkdown
Shutdown the port physically.
configure terminal
policy-map pmap2
configure terminal
policy-map pmap2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
class cmap1
storm-action vlandisable
class cmap1
no storm-action
1666