Show Ipv6 Multicast Forwarding - Allied Telesis x510-28GTX Command Reference Manual

M C
ULTICAST OMMANDS
6
SHOW IPV MULTICAST FORWARDING

show ipv6 multicast forwarding

Overview Use this command to view the status of multicast forwarding slow-path-packet
setting.
show ipv6 multicast forwarding
Syntax
Mode User Exec
Example To show the status of the multicast forwarding, slow-path-packet setting, use the
following command:
awplus#
Output Figure 32-11: Example output from the show ipv6 multicast forwarding
Related ipv6 multicast forward-slow-path-packet
Commands
C613-50170-01 Rev B
show ipv6 multicast forwarding
command:
ipv6 multicast forwarding is disabled
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1316