Ip Pim Register-Rp-Reachability - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM C
OMMANDS
- -
IP PIM REGISTER RP REACHABILITY

ip pim register-rp-reachability

Overview Use this command to enable the RP reachability check for PIM Register processing
at the DR. The default setting is no checking for RP-reachability.
Use the no variant of this command to disable this processing.
Syntax ip pim register-rp-reachability
no ip pim register-rp-reachability
Default This command is disabled; by default, there is no checking for RP-reachability.
Mode Global Configuration
awplus#
Example
awplus(config)#
C613-50170-01 Rev B
configure terminal
ip pim register-rp-reachability
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1343