Match Inner-Vlan - Allied Telesis x510-28GTX Command Reference Manual

Q S C
O OMMANDS
-
MATCH INNER VLAN

match inner-vlan

Overview Use this command to define the inner VLAN ID as match criteria.
Use the no variant of this command to disable the VLAN ID used as match criteria.
Syntax match inner-vlan <1-4094>
no match inner-vlan
Mode Class Map Configuration
Usage This command is used in double-tagged networks to match on a VLAN ID
belonging to the client network. For more information on VLAN double-tagged
networks, see the
To configure a class-map named cmap1 to match traffic from inner VLAN 3, use the
Examples
commands:
awplus#
awplus(config)#
awplus(config-cmap)#
To disable the configured VLAN ID as a match criteria for the class-map named
cmap1, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
C613-50170-01 Rev B
Parameter Description
<1-4094>
The VLAN number.
VLAN Feature Overview and Configuration
configure terminal
class-map cmap1
configure terminal
class-map cmap1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
match inner-vlan 3
no match inner-vlan
Guide.
1628