Atmf Backup Area-Masters Enable - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
-
ATMF BACKUP AREA MASTERS ENABLE

atmf backup area-masters enable

Overview Use this command to enable backup of remote area-masters from the AMF
controller. This command is only valid on AMF controllers.
Use the no form of the command to stop backups of remote area-masters.
Syntax atmf backup area-masters enable
no atmf backup area-masters enable
Mode Global configuration
Default Remote area backups are disabled by default
Usage Use the following commands to configure the remote area-master backups:
•
•
We recommend using the ext3 or ext4 filesystem on external media that are used
for AMF backups.
Example To enable scheduled backups of AMF remote area-masters, use the commands:
controller-1#
controller-1(config)#
To disable scheduled backups of AMF remote area-masters, use the commands:
controller-1#
controller-1(config)#
Related atmf backup server
Commands
atmf backup
show atmf backup area
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
atmf backup to configure when the backups begin and how often they run
atmf backup server
configure terminal
configure terminal
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
to configure the backup server.
atmf backup area-masters enable
no atmf backup area-masters enable
2235