Show Auth-Web-Server - Allied Telesis x510-28GTX Command Reference Manual

A C
UTHENTICATION OMMANDS
- -
SHOW AUTH WEB SERVER

show auth-web-server

Overview This command shows the Web-Authentication server configuration and status on
the switch.
show auth-web-server
Syntax
Mode Privileged Exec
Example To display Web-Authentication server configuration and status, enter the
command:
awplus#
Output Figure 42-8: Example output from the show auth-web-server command
Related auth-web-server ipaddress
Commands
auth-web-server port
auth-web-server redirect-delay-time
auth-web-server redirect-url
auth-web-server session-keep
auth-web-server ssl
C613-50170-01 Rev B
show auth-web-server
Web authentication server
Server status: enabled
Server mode: none
Server address: 192.168.1.1/24
DHCP server enabled
DHCP lease time: 20
DHCP WPAD Option URL: http://192.168.1.1/proxy.pac
HTTP Port No: 80
Security: disabled
Certification: default
SSL Port No: 443
Redirect URL: --
Redirect Delay Time: 5
HTTP Redirect: enabled
Session keep: disabled
PingPolling: disabled
PingInterval: 30
Timeout: 1
FailCount: 5
ReauthTimerReFresh: disabled
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1824