Atmf Guest-Class - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
-
ATMF GUEST CLASS

atmf guest-class

Overview This modal command creates a guest-class. Guest-classes are modal templates
that can be applied to selected guest types. Once you have created a guest-class,
you can select it by entering its mode. From here, you can then configure a further
set of operational settings specifically for the new guest-class. These settings can
then all be applied to a guest link by running the
command. The following settings can be configured from each guest class mode:
•
•
•
•
The no variant of this command removes the guest-class. Note that you cannot
remove a guest-class that is assigned to a port.
atmf guest-class <guest-class-name>
Syntax
no atmf guest-class
Mode Interface
Example 1 To create a guest-class named camera use the following commands:
node1#
node1(config)#
node1(config-atmf-guest)#
Example 2 To remove the guest-class named phone use the following commands:
node1#
node1(config)#
node1(config-atmf-guest)#
Related show atmf area guests
Commands
discovery
http-enable
username
modeltype
switchport atmf-guestlink
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
discovery method
model type
http-enable setting
guest port, user name, and password
Parameter
<guest-class-name>
configure terminal
atmf guest-class camera
configure terminal
no atmf guest-class phone
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
switchport atmf-guestlink
Description
The name assigned to the guest-class type. This can be
chosen from an arbitrary string of up to 15 characters.
end
end
2264