Server Mutual-Authentication - Allied Telesis x510-28GTX Command Reference Manual

AAA C
OMMANDS
-
SERVER MUTUAL AUTHENTICATION

server mutual-authentication

Overview This command enables or disables mutual certificate authentication for all
RadSecProxy servers. When enabled, the RadSecProxy AAA application will send a
local X.509 certificate to the server when establishing a TLS connection.
Use the no variant of this command to disable mutual certificate validation
causing the RadSecProxy AAA application to not transmit a certificate to the server.
NOTE
on the server, a connection will not be established.
server mutual-authentication
Syntax
no server mutual-authentication
Default Mutual authentication is enabled by default.
Mode RadSecProxy AAA Configuration Mode
Example Disable mutual certificate validation with the following command:
awplus#
awplus(config)#
awplus(config-radsecproxy-aaa)#
mutual-authentication
Related radius-secure-proxy aaa
Commands
server name-check
server (radsecproxy-aaa)
Command Version 5.4.6-2.1: command added
changes
C613-50170-01 Rev B
: If mutual authentication is disabled on the client (AAA) application but enabled
configure terminal
radius-secure-proxy aaa
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
no server
1871