PIM-SM C
OMMANDS
-
IP PIM SPARSE
MODE
ip pim sparse-mode
Overview
Use this command to enable PIM-SM on the VLAN interface.
Use the no variant of this command to disable PIM-SM on the VLAN interface.
Syntax
ip pim sparse-mode
no ip pim sparse-mode
Mode
Interface Configuration for a VLAN interface.
awplus#
Examples
awplus(config)#
awplus(config-if)#
awplus#
awplus(config)#
awplus(config-if)#
C613-50170-01 Rev B
configure terminal
interface vlan2
ip pim sparse-mode
configure terminal
interface vlan2
no ip pim sparse-mode
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1350