M
C
ULTICAST
OMMANDS
6
DEBUG NSM MCAST
debug nsm mcast6
Overview
Use this command to debug IPv6 events in the Multicast Routing Information Base
(MRIB).
This command is intended for use by Allied Telesis authorized service personnel
for diagnostic purposes.
Syntax
debug nsm mcast6 {all|fib-msg|mrt|register|stats|vif}
no debug nsm mcast6 {all|fib-msg|mrt|register|stats|vif}
Mode
Privileged Exec and Global Configuration
Examples
To enable debugging of all multicast route events, use the commands:
awplus#
awplus(config)#
To enable debugging of PIM register entries, use the commands:
awplus#
awplus(config)#
C613-50170-01 Rev B
Parameter
Description
all
All IPv6 multicast route debugging.
fib-msg
Forwarding Information Base (FIB) messages.
mrt
Multicast routes.
register
Multicast PIM register messages.
stats
Multicast statistics.
vif
Multicast interfaces.
configure terminal
debug nsm mcast6 all
configure terminal
debug nsm mcast6 register
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1292