DHCP S
C
NOOPING
OMMANDS
SHOW ARP SECURITY
show arp security
Overview
Use this command to display ARP security configuration.
show arp security
Syntax
Mode
User Exec and Privileged Exec
Example
To display ARP security configuration on the switch use the command:
awplus#
Table 1: Example output from the show arp security command
Table 2: Parameters in the output from the show arp security command
Related
arp security
Commands
show arp security interface
show arp security statistics
C613-50170-01 Rev B
show arp security
awplus# show arp security
ARP Security Information:
Total VLANs enabled ............. 2
Total VLANs disabled ............ 11
vlan1 .............. Disabled
vlan2 .............. Disabled
vlan3 .............. Disabled
vlan4 .............. Disabled
vlan5 .............. Disabled
vlan100 ............ Disabled
vlan101 ............ Disabled
vlan102 ............ Disabled
vlan103 ............ Disabled
vlan104 ............ Disabled
vlan105 ............ Enabled
vlan1000 ........... Disabled
vlan1001 ........... Enabled
Parameter
Total VLANs enabled
Total VLANs disabled
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The number of VLANs that have ARP security enabled.
The number of VLANs that have ARP security disabled.
2017