Ip Dhcp Snooping Agent-Option Allow-Untrusted - Allied Telesis x510-28GTX Command Reference Manual

Stackable gigabit edge switches x510 series
Table of Contents

Advertisement

DHCP S
C
NOOPING
OMMANDS
-
IP DHCP SNOOPING AGENT
OPTION ALLOW
ip dhcp snooping agent-option
allow-untrusted
Overview
Use this command to enable DHCP Relay Agent Option 82 information reception
on untrusted ports. When this is enabled, the switch accepts incoming DHCP
packets that contain DHCP Relay Agent Option 82 information on untrusted ports.
Use the no variant of this command to disable DHCP Relay Agent Option 82
information reception on untrusted ports.

ip dhcp snooping agent-option allow-untrusted

Syntax
no ip dhcp snooping agent-option allow-untrusted
Default
Disabled
Mode
Global Configuration
Usage
If the switch is connected via untrusted ports to edge switches that insert DHCP
Relay Agent Option 82 information into DHCP packets, you may need to allow
these DHCP packets through the untrusted ports, by using this command.
When this is disabled (default), the switch treats incoming DHCP packets on
untrusted ports that contain DHCP Relay Agent Option 82 information as DHCP
snooping violations: it drops them and applies any violation action specified by the
ip dhcp snooping violation
dropped; to display these statistics, use the
command.
Example
To enable DHCP snooping Option 82 information reception on untrusted ports,
use the commands:
awplus#
awplus(config)#
Related
ip dhcp snooping agent-option
Commands
ip dhcp snooping violation
show ip dhcp snooping
show ip dhcp snooping statistics
C613-50170-01 Rev B
-
UNTRUSTED
command. The switch stores statistics for packets
configure terminal
ip dhcp snooping agent-option allow-untrusted
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
show ip dhcp snooping statistics
2001

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents