Show Vrrp Ipv6 - Allied Telesis x510-28GTX Command Reference Manual

VRRP C
OMMANDS
6
SHOW VRRP IPV

show vrrp ipv6

Overview Use this command to display information about all configured VRRPv3 IPv6
sessions for all interfaces, or all VRRPv3 IPv6 sessions for a given interface with the
optional parameter.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
See the
about VRRPv3 IPv6 configuration details.
show vrrp ipv6 [<interface>]
Syntax
Mode User Exec and Privileged Exec
Example To display information about all VRRPv3 IPv6 sessions, enter the command:
awplus#
Output Figure 51-6: Example output from the show vrrp ipv6 vlan2 command
Related enable (VRRP)
Commands
disable (VRRP)
C613-50170-01 Rev B
VRRP Feature Overview and Configuration Guide
Parameter Description
<interface>
Specify the name of the interface that will participate in the virtual
routing. The interface must exist on the router. The interface
specified sends and receives VRRPv3 IPv6 advertisement messages.
show vrrp ipv6
awplus#show vrrp ipv6 vlan2
VrId <1>
State is Master
Virtual IP is fe80::202:b3ff:fed5:983e (Owner)
Interface is vlan2
Priority is 255
Advertisement interval is 4 sec
Preempt mode is FALSE
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
for more information
2135