Debug Ipv6 Pim Sparse-Mode - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 -
DEBUG IPV PIM SPARSE MODE

debug ipv6 pim sparse-mode

Overview Use this command to activate PIM-SMv6 debugging.
Use the no variant of this command to deactivate PIMv6 debugging. Note that the
undebug ipv6 pim sparse-mode
command.
Syntax debug ipv6 pim sparse-mode [all] [events] [mfc] [mib] [nexthop]
[nsm] [state] [timer]
no debug ipv6 pim sparse-mode [all] [events] [mfc] [mib]
[nexthop] [nsm] [state] [timer]
Mode Privileged Exec and Global Configuration
Example awplus#
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
awplus(config)#
C613-50170-01 Rev B
Parameter Description
all
Activates/deactivates all PIM-SMv6 debugging.
events
Activates debug printing of PIM-SMv6 events.
mfc
Activates debug printing of MFC (Multicast Forwarding Cache).
mib
Activates debug printing of PIM-SMv6 MIBs.
nexthop
Activates debug printing of PIM-SMv6 next hop communications.
nsm
Activates debugging of PIM-SMv6 NSM (Network Services Module)
communications.
state
Activates debug printing of state transition on all PIM-SMv6 FSMs.
timer
Activates debug printing of PIM-SMv6 timers.
configure terminal
terminal monitor
debug ipv6 pim sparse-mode all
configure terminal
terminal monitor
debug ipv6 pim sparse-mode events
configure terminal
terminal monitor
debug ipv6 pim sparse-mode nexthop
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command is an alias of the no variant of this
1377